palestine flag
We need your kind support
Families are impacted by the war and require your support.
StripePayPal

API للمطورين مرجع

ابدء

مفتاح API مطلوب لكي تتم معالجة الطلبات بواسطة النظام. بمجرد تسجيل المستخدم ، يتم إنشاء مفتاح API تلقائيًا لهذا المستخدم. يجب إرسال مفتاح API مع كل طلب (انظر المثال الكامل أدناه). إذا لم يتم إرسال مفتاح API أو انتهت صلاحيته ، فسيكون هناك خطأ. يرجى التأكد من الاحتفاظ بسرية مفتاح API الخاص بك لمنع إساءة الاستخدام.

المصادقة

للمصادقة مع نظام API ، تحتاج إلى إرسال مفتاح API الخاص بك كرمز ترخيص مميز مع كل طلب. يمكنك أن ترى نموذج التعليمات البرمجية أدناه.

curl --location --request POST 'https://showrtner.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
));

$response = curl_exec($curl);
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
حدود التقييم

تحتوي واجهة برمجة التطبيقات الخاصة بنا على محدد معدل للحماية من الارتفاع المفاجئ في الطلبات لتحقيق أقصى قدر من الاستقرار. تم تجاوز محدد الأسعار لدينا حاليًا بـ 30 طلبًا لكل 1 دقيقة. Please note that the rate might change according to the subscribed plan.

سيتم إرسال العديد من العناوين جنبًا إلى جنب مع الاستجابة ويمكن فحصها لتحديد المعلومات المختلفة حول الطلب.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
معالجة الاستجابة

يتم عرض جميع استجابات API بتنسيق JSON افتراضيًا. لتحويل هذا إلى بيانات قابلة للاستخدام ، يجب استخدام الوظيفة المناسبة وفقًا للغة. في PHP ، يمكن استخدام الوظيفة json_decode () لتحويل البيانات إلى كائن (افتراضي) أو مصفوفة (اضبط المعلمة الثانية على true). من المهم جدًا التحقق من مفتاح الخطأ حيث يوفر ذلك معلومات حول ما إذا كان هناك خطأ أم لا. يمكنك أيضًا التحقق من رمز العنوان.

{
    "error": 1,
    "message": "An error occurred"
}

Account

Get Account
GET https://showrtner.com/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

curl --location --request GET 'https://showrtner.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Update Account
PUT https://showrtner.com/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

curl --location --request PUT 'https://showrtner.com/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "email": "[email protected]",
	    "password": "newpassword"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "[email protected]",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Account has been successfully updated."
}

Files

List Files
GET https://showrtner.com/api/files?limit=2&page=1

Get all of your files. You can also search by name.

معاملوصف
name (optional) Search for a file by name
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/files?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/files?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/files?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "result": 3,
    "perpage": 15,
    "currentpage": 1,
    "nextpage": null,
    "maxpage": 1,
    "list": [
        {
            "id": 1,
            "name": "My Photo",
            "downloads": 10,
            "shorturl": "https:\/\/showrtner.com\/xlGVN",
            "date": "2022-08-09 17:00:00"
        },
        {
            "id": 2,
            "name": "My Documents",
            "downloads": 15,
            "shorturl": "https:\/\/showrtner.com\/DETTp",
            "date": "2022-08-10 17:01:00"
        },
        {
            "id": 3,
            "name": "My Files",
            "downloads": 5,
            "shorturl": "https:\/\/showrtner.com\/INdII",
            "date": "2022-08-11 19:01:00"
        }
    ]
}
Upload a file
POST https://showrtner.com/api/files/upload/:filename?name=My+File

Upload a file by sending the binary data as the post body. You need to send the file name including the extension instead of :filename in the url (e.g. brandkit.zip). You can set options by sending the following parameters.

معاملوصف
name (optional) File name
custom (optional) Custom alias instead of random alias.
domain (optional) Custom Domain
password (optional) Password protection
expiry (optional) Expiration for the download example 2021-09-28
maxdownloads (optional) Maximum number of downloads
curl --location --request POST 'https://showrtner.com/api/files/upload/:filename?name=My+File' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '"BINARY DATA"'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/files/upload/:filename?name=My+File",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '"BINARY DATA"',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/files/upload/:filename?name=My+File',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify("BINARY DATA"),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 1,
    "shorturl": "https:\/\/showrtner.com\/vyEfi"
}

QR رموز

List QR codes
GET https://showrtner.com/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/showrtner.com\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/showrtner.com\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Get a single QR Code
GET https://showrtner.com/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

curl --location --request GET 'https://showrtner.com/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/showrtner.com\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Create a QR Code
POST https://showrtner.com/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://showrtner.com/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/showrtner.com\/qr\/a58f79"
}
Update QR Code
PUT https://showrtner.com/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://showrtner.com/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Delete a QR Code
DELETE https://showrtner.com/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

curl --location --request DELETE 'https://showrtner.com/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://showrtner.com/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Send SMS

Get Twilio phone numbers
GET https://showrtner.com/api/sms/numbers

Get your Twilio phone numbers.

curl --location --request GET 'https://showrtner.com/api/sms/numbers' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/sms/numbers",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/sms/numbers',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "numbers": [
        "+123456798",
        "+258369147"
    ]
}
List Messages
GET https://showrtner.com/api/sms/messages?limit=2&page=1

Get all of your sent messages. You can also search for a specific number.

معاملوصف
number (optional) Search for a specific phone number
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/sms/messages?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/sms/messages?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/sms/messages?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "result": 10,
    "perpage": 15,
    "currentpage": 1,
    "nextpage": null,
    "maxpage": 1,
    "list": [
        {
            "from": "+123456798",
            "to": "+987654321",
            "status": "sent",
            "message": "Sales starting now!! https:\/\/showrtner.com\/A1b2",
            "date": "2022-08-09 17:00:00"
        },
        {
            "from": "+123456798",
            "to": "+147258369",
            "status": "failed",
            "message": "Sales starting now!! https:\/\/showrtner.com\/A1b2",
            "date": "2022-08-09 17:01:00"
        },
        {
            "from": "+123456798",
            "to": "+369258147",
            "status": "delivered",
            "message": "Sales starting now!! https:\/\/showrtner.com\/A1b2",
            "date": "2022-08-09 17:01:30"
        }
    ]
}
Send SMS
POST https://showrtner.com/api/sms/send

Send SMS to one or more phones numbers and shorten links within the SMS.

معاملوصف
from (required) From phone number in your Twilio account.
to (required) Array of phone numbers
message (required) SMS message
curl --location --request POST 'https://showrtner.com/api/sms/send' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "from": "+123456798",
    "to": [
        "+987654321",
        "+147258369",
        "+369258147"
    ],
    "message": "Sales starting now!! https:\/\/mysite.com\/en\/black-friday-sales?utm_source=sms&utm_medium=sms"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/sms/send",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "from": "+123456798",
	    "to": [
	        "+987654321",
	        "+147258369",
	        "+369258147"
	    ],
	    "message": "Sales starting now!! https:\/\/mysite.com\/en\/black-friday-sales?utm_source=sms&utm_medium=sms"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/sms/send',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "from": "+123456798",
    "to": [
        "+987654321",
        "+147258369",
        "+369258147"
    ],
    "message": "Sales starting now!! https:\/\/mysite.com\/en\/black-friday-sales?utm_source=sms&utm_medium=sms"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "SMS has been sent successfully"
}

الحملات

List Campaigns
GET https://showrtner.com/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
أنشئ حملة
POST https://showrtner.com/api/campaign/add

A campaign can be added using this endpoint.

معاملوصف
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://showrtner.com/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Campaign",
	    "slug": "new-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://showrtner.com/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://showrtner.com/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
تحديث الحملة
PUT https://showrtner.com/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://showrtner.com/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Twitter Campaign",
	    "slug": "twitter-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://showrtner.com/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://showrtner.com/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://showrtner.com/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

الروابط


القنوات

List Channels
GET https://showrtner.com/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://showrtner.com/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/showrtner.com\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/showrtner.com\/mybio",
                "link": "https:\/\/showrtner.com\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
قم بإنشاء قناة
POST https://showrtner.com/api/channel/add

A channel can be added using this endpoint.

معاملوصف
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://showrtner.com/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Channel",
	    "description": "my new channel",
	    "color": "#000000",
	    "starred": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://showrtner.com/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

معاملوصف
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://showrtner.com/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
Update Channel
PUT https://showrtner.com/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://showrtner.com/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Acme Corp",
	    "description": "channel for items for Acme Corp",
	    "color": "#FFFFFF",
	    "starred": false
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://showrtner.com/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://showrtner.com/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://showrtner.com/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

المجالات ذات العلامات التجارية

List Branded Domains
GET https://showrtner.com/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://showrtner.com/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

معاملوصف
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://showrtner.com/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "domain": "https:\/\/domain1.com",
	    "redirectroot": "https:\/\/rootdomain.com",
	    "redirect404": "https:\/\/rootdomain.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 1
}
تحديث الدومين
PUT https://showrtner.com/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://showrtner.com/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "redirectroot": "https:\/\/rootdomain-new.com",
	    "redirect404": "https:\/\/rootdomain-new.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://showrtner.com/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://showrtner.com/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://showrtner.com/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

بكسل

List Pixels
GET https://showrtner.com/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://showrtner.com/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

معاملوصف
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://showrtner.com/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "gtmpixel",
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://showrtner.com/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "id": 1
}
تحديث Pixel
PUT https://showrtner.com/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

معاملوصف
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://showrtner.com/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://showrtner.com/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://showrtner.com/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://showrtner.com/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://showrtner.com/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

تراكبات عبارات الحث على الشراء

List CTA Overlays
GET https://showrtner.com/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

سبلاش مخصص

List Custom Splash
GET https://showrtner.com/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

معاملوصف
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://showrtner.com/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://showrtner.com/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://showrtner.com/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
استجابة الخادم
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}